Coal rod machine is the product of recent years, using this machine to produce coal rod cost is lower! Faster returns! It is the product of investors. Coal rod molding machine is the production of coal rod with the first carbonization and molding process, which is a new product with technology and market introduced by our factory. This series of equipment is the use of sawdust, shaver, wood corner waste, tree branches, rice husk, peanut shell, bagasse, wine residue, cotton stalk, corn stalk, wheatgrass, straw and other northern and southern crops of orange stalk as raw materials, using our new type of carbonization, can get the ideal charcoal powder, or use the waste carbon residue left in the manufacture of coal rod, factory waste carbon powder, etc. After grinding, mixing, pressing and forming. It is the ideal equipment for energy, waste utilization and turning waste into treasure.
Working principle: Coal rod machine is to match and retting the mixture of powdered coal into the feed barrel, using the principle of spiral extrusion to compress it into a cross-section, formed products are round, plum or other shapes. It is a forming equipment with mechanical strength. The machine adopts variable pitch impeller to push forward the pulverized coal at the back of the barrel. After the pulverized coal is compressed in the barrel volume, it is extruded through the round hole of the front head to form a coal rod. There are many kinds of round hole shapes and there are many kinds of coal rod shapes. The coal rod is naturally broken by gravity as it moves forward.
Processing technology:
1. Feed screw lead is large, feed fast, push screw lead is small, save power.
2. Shaft seat and cylinder body using rigid link, high concentricity, anti-reverse thrust, machine stability;
3. The part to be sealed adopts fault structure, and the dirt is missing from the fault;
4. Hydraulic coupling drive, smooth operation, low noise, and overload protection.
| Attributes | |||||
| model | RCMBJ140 | RCMBJ180 | RCMBJ220 | RCMBJ300 | RCMBJ400 |
| production capacity | 1-2T | 2-3T | 3-4T | 4-6T | 6-10T |
| molding specification | 20-40mm | 20-60mm | 20-80mm | 20-80mm | 20-80mm |
| speed of mainshaft | 46-60r/min | 39-60r/min | 35-60r/min | 35-60r/min | 35-60r/min |
| Number of spiral blades | 4 | 4 | 4 | 4 | 4 |
| motor |
Y160m-411kw Y160l-415kw |
Y180m-418.5kw Y180l-422kw |
Y200l-430kw Y225s-437kw |
Y225s-437kw Y225m-445kw |
Y315m-4160kw |
| reduction gears | ZQ350 | ZQ400 | ZQ500 | ZQ650-750 | ZQ850 |
| bearings |
7511.211. 210.1305. |
7614.314. 313.1206. |
7619.319. 318.1206. |
32320.320. 319.1207. |
32322.322. 321. |
| Remark: the spindle speed is the lowest revolution, which can be appropriately adjusted according to the current size, load weight and output. | |||||
If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.
